BLOG · KITCHENS AND CABINETS
How to price custom cabinets: a pricing model for cabinet makers
Ask ten cabinet makers how they price a kitchen and you get ten answers: per linear foot, per box, materials times three, "what the last one cost". Most of them work until the shop grows, a new person starts quoting, or material prices jump.
This is a pricing model you can build in a spreadsheet in an afternoon. It starts from what a cabinet really costs you and ends with a price book anyone in the shop can quote from.
Step 1: know what one box costs you
For each cabinet type, add up four things:
| Cost | What goes in it |
|---|---|
| Materials | Sheet goods, solid wood, doors and drawer fronts, edge banding, finish |
| Hardware | Hinges, slides, shelf pins, legs, pulls if you supply them |
| Labor | Hours to cut, edge, machine, assemble and finish, times your shop rate |
| Outside work | Doors you buy in, painting you send out, CNC time you rent |
Time a few boxes of each type on a normal day, not a good one. The labor hours are the number most shops guess wrong.
Step 2: set a shop rate that covers the whole shop
Your shop rate is what one hour of shop time has to bring in, and it is much higher than the wage. In the United States, cabinet makers earned about $24 an hour on average in 2026 (ZipRecruiter), while homeowners are quoted $70 to $175 an hour for a cabinet maker's time (Angi).
The gap is everything else the hour has to pay for:
- payroll taxes, insurance and paid time off,
- rent, power and machines,
- the hours nobody bills: quoting, design, deliveries, fixing mistakes,
- software, vehicles and tools,
- and profit.
A simple way to find yours: add up a year of overhead and wages, divide by the hours you actually bill (often 60 to 70% of hours paid), and add your profit target.
Step 3: know markup from margin
Many shops add 30% to cost and expect a 30% margin. Adding 30% gives a margin of 23%.
| Markup on cost | Margin on price |
|---|---|
| 25% | 20% |
| 43% | 30% |
| 50% | 33% |
| 67% | 40% |
| 100% | 50% |
If you want a 30% margin, multiply cost by 1.43, not 1.3.
Step 4: build a price book by cabinet code
Once you know the cost and the markup for each type, write a price book:
- A base price per code and width. B15, B18, B21 and so on, for base, drawer base, sink base, wall and tall cabinets.
- Multipliers for door style and finish. For example, slab at 1.0, shaker at 1.1, inset at 1.35. Painted at 1.15, stained oak at 1.1.
- Adders for upgrades. Soft-close, roll-out trays, pull-out bins, glass doors, lighting, each at a fixed price.
- Fixed lines for the small parts. Fillers, crown and toe kick per length, end panels per piece.
The numbers above are examples; yours come from steps 1 to 3. The point is the shape: anyone in the shop can now price a kitchen by adding lines, and two people will get the same answer.
Step 5: use price per linear foot for the first talk only
Per linear foot is the number homeowners know. Custom cabinets run about $500 to $1,200 per linear foot installed in the US (HomeGuide). It is a good answer to "roughly what will this cost?" on a first call.
It is a bad way to write the final quote. A run of drawer bases costs more than a run of plain base cabinets; a tall pantry and a corner unit break the math; and upgrades vanish into an average. Give the range per foot on the phone, and quote by the box.
Step 6: check the model against real jobs
Price your last ten finished kitchens with the new price book and compare with what they really cost you. If the book says a job made 30% and it really made 12%, find the line that lies, usually labor hours on painted work or the time spent on design.
Step 7: review it every quarter
Sheet goods, hardware and finishes change price, and in the US softwood lumber now carries a 10% tariff. Look at the book every three months, change the base prices, and put a "valid until" date on every quote so old quotes don't lock in old costs.
Where a configurator fits
A price book is a set of rules: this cabinet in this width, times this door style, plus these upgrades. That is exactly what a configurator runs. Put the book into a configurator on your site and buyers can lay out their own kitchen and watch the price change as they choose, using your numbers, while your team quotes only the jobs that are ready to buy.